Enviro Test Construct Portable Handheld Oscilloscope

SKU: ETCDOS-108 Category:

Technical Specification

 Real-time sampling rate 1 GSa/s
 Equivalent sampling rate 5 GSa/s
 Time base range 1 ns/Div – 10 s/Div (in)
 Storage depth (dual channel) 8 Mpts
 Bandwidth 150 MHz
 Input coupling DC or AC
 Input impedance 1 MΩ//~16pF
 Vertical sensitivity 10 mV/Div to 5 V/Div
 Vertical resolution 8 bits
 Input withstands voltage range Peaks ≤ 250 V
 Trigger mode Automatic Normal (ch0 and ch1)
 Trigger position 0 % to 100 % sampling depth
 Hold-off range 0 s to 1 s
 Trigger Type Edge (rising or falling)
 Cursor Y-axis and X-axis cursor
 Manual measurement Width/frequency/period/voltage amplitude
 Automatic measurement Frequency/period/+duty cycle/-duty cycle/+pulse number rising edge/falling edge/+pulse width/-pulse width/burst pulse   width/amplitude/high level/low level /rms/average/peak-to-peak/maximum/minimum/+overshoot/-overshoot
 Time-domain waveforms Real-time waveform acquired in a single shot (high frame rate hardware processing engine)
 X-Y mode Lissajous figure
 Waveform type sine/square/triangle/sawtooth wave
 Waveform frequency 0 KHz to 100 KHz
 Square wave duty cycle 10% to 90%
 Waveform amplitude 0 V to 3 V (min Vpp=0.5 V)
 Mini-HDMI Extends acquisition based on other sensors
 BNC Extended Current/Differential Probes

Reviews

There are no reviews yet.

Be the first to review “Enviro Test Construct Portable Handheld Oscilloscope”

Your email address will not be published. Required fields are marked *

Scroll to Top