Enviro Test Construct Hydrogen Sulfide Gas Detector

This Hydrogen Sulfide Gas Detector has temperature -4 °F to 122 °F, working humidity of 0% RH to 95% RH and 3.7 V rechargeable lithium battery.

SKU: ETCRHSGD-109 Category:

Features

  • LCD dot matrix display, support Chinese and English operation
  • The gas concentration unit PPM and mg per m3 can be shifted quickly
  • Ultra-high buzzer alarm sound, higher and lower alarm values are settable
  • Data storage function, historical data can be viewed on the device
  • Rechargeable lithium polymer battery of large capacity, which ensures the
  • Strong and up scale alligator clip, convenient to take along during operation

 

Technical Specifications

Detection PrincipleElectrochemistry
Measure Range0 Ppm to 50 ppm,0 ppm to 100 ppm,0 ppm to 200 ppm,0 ppm to 500 ppm,0 ppm to 1000 ppm,0 ppm to 2000 ppm,0 ppm to 5000 ppm (range is optional and customized)
Resolution0.01 Ppm,0.1 ppm,1 ppm
Precision3% FS
Sampling MethodDiffusion (add external sampling pump if necessary)
UnitPpm, mg per m3
DisplayMonochrome dot matrix 128 x 128 LCD graphic display.
 BacklightThe time of the backlight is settable, and when alarm the backlight will be auto-on.
Direct ReadingGas molecular formula, concentration unit, measured value, time, battery, alarm state, data record status.
 Data RecordingStorage capacity of over one hundred thousand sets, it can continue to store for 15 months with interval of 5 minutes. Interval time ranges from 10 seconds to 3600 seconds are settable. (Optional function)
Data TransmissionHigh speed data transmission by USB, and is available for data downloading and printing after installing necessary software (optional function).
CalibrationTwo target point calibration, both can be set up a calibration value. Support automatic zero point calibration of all channels by one click.
Password ProtectionCalibration is protected by password, and the password is resettable.
Restoration:Support restoration of factory calibration, support restoration of factory parameter settings.
Alarm TypeSound and light. Higher and lower alarm point values are settable. There are three alarm statuses for selection: ON OFF or MUTE.
Battery3.7 V Rechargeable lithium battery, with capacity of 1800 mAh, and the working time is more than 50 hours (no combustible gas), and the charging time is less than 6 hours.
Explosion-Proof GradeExiaⅡCT4
Protection Grade:IP66
Working Humidity0% RH to 95% RH (Non-condensing, a filter dryer is needed in environment of humidity more than 90% RH)
Housing MaterialABS + PC
Working Temperature-4 °F to 122 °F (-20 ℃ to 50 ℃)
Size6.10 In x 3.07 in x 1.37 in (155 mm x 78 mm x 35 mm)
Weight 0.66 lb (0.3 kg)

Reviews

There are no reviews yet.

Be the first to review “Enviro Test Construct Hydrogen Sulfide Gas Detector”

Your email address will not be published. Required fields are marked *

Scroll to Top