High-Resolution Portable Touchscreen Oscilloscope with AWG & Logic Analyzer– Enviro Test Construct

Compact oscilloscope with 2GSa/s, 12-bit resolution, 100Mpts memory, AWG, logic analyzer, FFT, waveform generator and touchscreen for advanced signal analysis.

SKU: ETCHDO-212 Category:

Technical Specifications

Parameters Details 
Bandwidth (-3 dB) 125 MHz  250 MHz 125 MHz 250 MHz 
Channel 2 4 
Max Sample Rate 2GSa/s(single-channel)1GSa/s (dual-channel) 500MSa/s(full-channel) 
Acquire Modes Sample, Peak, High Res, Average, Segmentation 
Max. Waveform Capture Rate 700,000 wfms/s (Max.) 
Vertical Sensitivity 200 μV/div to 10 V/div 
Vertical Resolution 12 bits 
Relay time accuracy +25 ppm (typical) 
Sampling rate range 1ns/div – 1000s/div, step by 1-2-5 
DC Gain Accuracy 3% (≤ 1 mV), 2% (≥ 2 mV) 
Input Impedance 1 MQ+2%, parallel with20 pF+5 pF 
Probe Attenuation Coefficient  1.00uX-1M.00X, step by 1-2-5, support custom 
Max Memory Depth 100 M points 
Time base Range 1 ns/div to 1000 s/div 
Trigger Types Edge, Video, Pulse, Slope, Runt, Windows, Timeout, Nth, Logic, RS232/UART, 12C, SPI CAN, LIN 
Bus Decoding RS232/UART, I²C, SPI, CAN, LIN 
  
Auto Measurements Period, Frequency, +Width, -Width, Rise Time, Fall Time, Scr Duty, +Duty, -Duty, Vavg, Vpp, VRMS, Overshoot, Vmax, Vmin, Vtop, CycRms, Vbase, Vamp, Preshoot, Std Dev, +Pulse Cnt, -Pulse Cnt, Rise Cnt, Fall Cnt, Area, Cyc Area, Delay(A1-B1), Delay (At-Bl), Delay (Al-B1), Delay (Al-Bl), Phase(A1-B1), Phase(A1-Bl), Phase(Al-Bt), Phase (Al-Bl), FRR(AT-B1), FRF(A1-Bl), FFR(Al-BT), FFF(Al-Bl), LRR(AT-BT), LRF(A1-Bl), LFR(AL-BT),  

LFF(Al-Bl) 

Waveform Math +,-%/,&8&, ]|~ !, Intg, Diff, Sqrt, Function operation (Lg / Ln / Exp / Abs / Sine / Cosine / Tan), FFT, FFT rms, User Defined, digital filter (low pass, high pass, band pass, band reject) 
Frequency Counter 6-digit frequency counter, Maximum frequency: maximum analog bandwidth of oscilloscope 
Voltmeter Support DC, AC+DCrms, ACrms, Resolution: 4 digits (ACV/DCV) 
Arbitrary Waveform Generator (Optional) 
Max Frequency Output 30 MHz single 
Sample Rate 160 MSa/s 
Standard Waveforms Sine, Square, Ramp, Pulse, Noise 
Arbitrary Waveforms 28 built-in, user-defined (2-8K points length) 
Vertical Resolution 14 bits 
Impedance 50 Ω (type) 
Amplitude Range 2 mVpp to 10 Vpp (1 MΩ), 1 mVpp to 5 Vpp (50 Ω) 
Modulation AM, FM, PM, FSK 
Arb Waveform 1uHz ~ 10MHz 
Logical Analyzer (Optional) 
Channels 16 (D0-D15) (D0 to D7, D8 to D15) 
Threshold Range ±20.0 V, 10 mV step 
Min. Voltage Swing 500 mVpp 
Max. Dynamic Range ±+40V peak CAT I, transient overvoltage 800Vpk 
Max. Input Voltage ±30 V + threshold 
Input Impedance 100 kΩ, 8 pF 
Vertical Resolution 1 bit 
Other 
Display 7-inch capacitive multi-touchscreen (1024×600) 
Communication Interfaces  HDMI, USB Device, USB Host, LAN, Trig Out (P/F) 
Power Supply USB Type-C (requires external 12V/4A power bank)  
Dimensions (WxHxD) 10.2 in x 6.3 in x 3.1 in (260 mm x 160 mm x 78 mm) 
Weight (3.3 lbs)1.5 kg (unit only, package excluded) 

Reviews

There are no reviews yet.

Be the first to review “High-Resolution Portable Touchscreen Oscilloscope with AWG & Logic Analyzer– Enviro Test Construct”

Your email address will not be published. Required fields are marked *

Scroll to Top