Enviro Test Construct Waterproof Gas Detector NH3

Enviro Test Construct waterproof gas detector nh3 can effectively resist a three-meter drop The protection level of the instrument reaches IP67.

SKU: ETCHAGD-203 Category:

Overview

Enviro Test Construct waterproof gas detector nh3 can effectively resist a three-meter drop The protection level of the instrument reaches IP67. The instrument has passed the EMC anti-static interference test and can work normally in the walkie-talkie environment. The man down alarm function has upgraded the safety of underground operators. It has password protection functions that prevent non-operators from modifying menu parameters. With safety reminder function, sound and light vibration alarm function, let operators work without worries. The high and low alarm latched function allows the operator to better capture the sudden change of the gas concentration value.

 

Technical Specifications

Sampling MethodPump suction type
Gas TypeNH3 HCN ETO CH3Br O3 etc
Measure RangeOptional
ResolutionOptional
Response Time≤ 30 seconds
Precision≤ ±2 % F.S except for special gases
Automatically Test And Calibrate After Power-OnIncluding reset, maximum value (MAX), minimum value (MIN), STEL, TWA value
UnitPPM and mg or m³ can be switched and displayed by one key, and the concentration value is automatically converted by the system
DisplayMonochrome graphics (160 x 96), screen can be automatically flipped
BacklightThe backlight time can be manually set, and will be turned on automatically when an alarm is issued
Data RecordCan store 100,000 sets data, the storage interval is adjustable from 5 seconds to 3600 seconds, data can be exported, with data cable
Alarm95 dB buzzer (@30 cm) 11.81 in, vibration alarm and flashing red LED and alarm status indication on the screen, alarm latched; diagnostic alarm and battery undervoltage alarm, pump block alarm; man down alarm, with early warning and optional real-time remote Bluetooth notification function
Battery3.7 V rechargeable lithium battery, battery capacity 2200 mA
Working HoursMore than 15 hours in continuous pumping mode
ChargerTravel charger with DC interface, charging time ≥ 4 hours
Protection GradeIP67
Humidity0 % RH to 90 % RH (no condensation)
Environmental Pressure12.47 PSI (86 Kpa) to 15.44 PSI (106 Kpa)
Working Temperature-4 °F to 122 °F (-20 °C to 50 °C)
Size6.2 in x 3.3 in x 2.3 in (157 mm x 84.5 mm x 59.5 mm)
including back clip or water trap filter
Weight0.804 lb (0.36 kg) including battery, belt clip and filter

Reviews

There are no reviews yet.

Be the first to review “Enviro Test Construct Waterproof Gas Detector NH3”

Your email address will not be published. Required fields are marked *

Scroll to Top