Enviro Test Construct Water Conductivity Sensor

Enviro Test Construct water conductivity sensor is a quadrupole measuring electrode, a variety of range selection. Widely used in pure water, surface water, circulating water, water reuse and other systems as well as electronic, electroplating, chemical, food, pharmaceutical and other process fields.

SKU: ETCHCM-302 Category:

Overview

Enviro Test Construct water conductivity sensor is a quadrupole measuring electrode, a variety of range selection. Widely used in pure water, surface water, circulating water, water reuse and other systems as well as electronic, electroplating, chemical, food, pharmaceutical and other process fields. Excellent performance in sewage treatment, drinking water treatment, surface water monitoring, pollution source monitoring and other applications.

 

Features

  • Easy to use
  • Stable measurement
  • Fully functional
  • Data assurance

 

Technical Specifications

RangeConductivity: 0 ms per cm to 200 ms per cm
TDS: 0 mg per l to 9999 mg per l
Salinity: 0 % to 200 %
ResolutionConductivity: 0.01μS per cm or 0.1μS per cm or 1μS per cm
TDS: 0.01mg per l
Salinity: 0.01%
PrecisionConductivity: 1 %
TDS: 1 %
Salinity: 2 %
CalibrationElectrode coefficient correction, adjust the coefficient according to the comparison measurement
DisplayLCD display rates, time, measurements, historical trends lines, etc
Data StorageAutomatic memory function, power failure data protection, can store query historical data
Analog Output2 isolation 4mA to 20mA, output program corresponding to conductivity, TDS, temperature measurement
Relay Output3 relays can be configured for high alarm, low alarm or timing function
AC Powered85 vacs to 265 vac, 50Hz or 60Hz
DC Powered24vdc 10 %
Degree Of ProtectionTransmitter: IP65
Sensor: IP68
Work PressureUp to 4 bars
Relative Humidity0% rh to 95 %rh, non condensing
Temperature CompensationPT1000 automatic temperature compensation, temperature compensation can be manually set
Operating TemperatureTransmitter: 68°F to 140°F (20°C to 60°C)
Sensor: 32 °F to 160 °F (0 °C to 60 °C)
Temperature Resolution0.01°F (0.01°C)
Temperature Precision0.2°F (0.2°C)
Temperature Range32°F to 176 °F (0℃ to 80℃)
Sensor Size0.55 in x 4.88 in (14 mm x 124 mm)
Transmitter Size6.69 in x 7.16 in x 2.95 in (170 mm x 182 mm x 75 mm)

Reviews

There are no reviews yet.

Be the first to review “Enviro Test Construct Water Conductivity Sensor”

Your email address will not be published. Required fields are marked *

Scroll to Top