Enviro Test Construct Underground Cable Fault Locator

This Underground Cable Fault Locator has the longest testing distance 15 km (100 km for the open-wire line), Testing dead zone 1 m, and Resolution of reading 1 m.

SKU: ETCBDGFL-204 Category:

Technical Specifications

The Longest Testing Distances15 km (100 km for the open-wire line)
Testing Dead Zone1 m
Resolution Of Reading1 m
Power Dissipation5 VA
Environment Temperature32 °F to 104 °F (0 ℃ to 40 ℃)
Terminal Temperature14 °F to 122 °F (-10 ℃ to 50 ℃)
Relative Humility20% to 90% RH
Dimension10.8 in x 8.6 in x 6.3 in (275 mm × 220 mm × 160 mm3)
Weigh4 lb (1.8 kg)
Operation ModeOutput – fixed frequency intermittent square wave signal
Output PowerPomax ≥ 100 W
Output Impedance1Ω to unlimited
Output Signal Frequency16 kHz
Output Signal Amplitude15 V to 340 V
Pathfinder Transmitter Power SupplyAC 220 V ± 10%
Rough Measurement ErrorLess than 10%
Fixed-Point Error< ± 10 cm
Electromagnetic Channel Gain> 110 dB (300.000 times)
Electromagnetic Channel Receiver Sensitivity< 5 μV
Sound Channel Audio Amplifier Gain< 120 dB (1 million times when the signal-to-noise ratio is 4:1)
50 Hz Power Frequency Rejection> 40 dB (100 times)
Power Consumption< 120 mA (0.7 W)
Buried Depth Detection> ≦ 3 m

Reviews

There are no reviews yet.

Be the first to review “Enviro Test Construct Underground Cable Fault Locator”

Your email address will not be published. Required fields are marked *

Scroll to Top