Enviro Test Construct Touch Screen Tablet Digital Oscilloscope Kit

SKU: ETCDOS-115 Category:

Features

  • Digital oscilloscope, dual channel, bandwidth up to 100MHz, real time sampling rate 1GS/s.
  • 8in (800 x 600) multi touch LCD screen, easy to operate, is a good helper for electronic measurement
  • With normal mode and extended window mode, can zoom in for observation and detection
  • It can select up to 14-bit high precise vertical resolution, up to 40M storage depth, and 45,000 wfms/s waveform refreshing rate
  • Support USB host, USB device, LAN communication interface, low noise, small signal test is more accurate
  • Support oscilloscope + multimeter dual functions, with a variety of advanced triggering and decoding functions, easy to measure
  • Widely used in electronic production, home appliance repair, automobile repair, product development, science education, etc.

 

Technical Specifications

Display Type8 in (203.2 mm) Color LCD Display
Display Resolution800 Horizontal x 600 Vertical Pixels
Display Color65536 Colors, TFT
Bandwidth100 MHz
Vertical Resolution (A/D)8-Bit
Channel2
Waveform Refresh Rate45,000 wfms/s
Real-Time Sampling Rate (Two Channels)500 MSa/s
Real-Time Sampling Rate (Single Channel)1 GSa/s
Input CouplingDC, AC, Ground
Input Resistance1 MΩ±2%, in parallel with 15 pF±5 pF
Probe Attenuation Coefficient0.001 X to 1000 X, step by 1-2-5 system
Maximum Input Voltage400 V (DC+AC Peak Value)
Horizontal Scanning Range (S/Div)2 ns/Div to 1000 s/Div
Vertical Sensitivity (Volt/Div) Range1 mV/Div to 10 V/Div
Analog Bandwidth120 MHz
DC Gain Accuracy1 mV, ±4%, ≥2 mV, ±3%
Maximum Storage Depth40 M Points (Single Channel)
Time Base AccuracyMaximum ±10 ppm (Ambient Temperature Is 77 ºF (+25 ºC))
Trigger TypeEdge, Video, Pulse Width, Slope, Runt, Over Amplitude (Windows Trigger), Timeout, Nth Edge, Logic, I2C, SPI, RS232, CAN (Optional)
Decoding TypeI2C, SPI, RS232, CAN
Trigger MethodAutomatic, Normal, Single
Video TriggerSignal System Support any field frequency or line frequency NTSC, PAL and SECAM broadcasting system
MeasuringCursor Measurement Voltage Difference Between Cursors (△V), Time Difference Between Cursors (△T), Time Difference Between Cursors & Voltage Difference (△T&△V), Automatic Cursor
Communication InterfaceUSB Host, USB Device; Trig Out (Pass/Fail); LAN Interface
Power Consumption<15 W
Multimeter Digital Display4 Digits (Maximum display is 19999)
Maximum Input DC Voltage1000 V
Maximum Input AC Voltage750 V (Effective Value)
Impedance200 Ω: ±(0.8%+10digit) to 2MΩ: ±(0.5%+3digit)
Battery7.4 V, 8000 mAh (lasts about 5 hours when fully charged)
Operating Temperature32 ℉ to 104 ℉ (0 ºC to 40 ºC)
Storage Temperature-4 ℉ to 140 ℉ (-20 ºC to 60 ºC)
Relative Humidity≤ 90%
Operating Altitude118,110.24 in (300,000 mm)
Non-Operating Altitude590,561.68 in  (1,500,000 mm)
Cooling MethodFan Cooling
Dimension (WHD)13.39 in × 6.97 in × 3.54 in (340 mm × 177 mm × 90 mm)

 

Reviews

There are no reviews yet.

Be the first to review “Enviro Test Construct Touch Screen Tablet Digital Oscilloscope Kit”

Your email address will not be published. Required fields are marked *

Scroll to Top