Enviro Test Construct Radiation Meter Detector

This Radiation Meter Detector has a frequency range of 50 MHz to 3.5 GHz, display refresh rate of typically 400 mS, and battery life of > 15 hours.

SKU: ETCIRM-208 Category:

Features

  • 50 MHz to 3.5 GHz frequency range
  • For isotropic measurements of electromagnetic fields
  • Non-directional (isotropic) measurement with three-channel measurement probe
  • High dynamic range due to three-channel digital results processing
  • Configurable alarm threshold and memory function
  • Easy to use
  • High frequency (RF) electromagnetic wave field strength measurement
  • Mobil phone base station antenna radiation power density measurement
  • Wireless communication applications (CW, TDMA, GSM, DECT)
  • Wireless LAN (Wi-Fi) detection, installation
  • Spy camera, wireless bug finder
  • Cellular/Cordless phone radiation safety level
  • Microwave oven leakage detection
  • Personal living environment EMF safety
  • RF power measurement for transmitters

 

Technical Specifications

Sensor TypeElectric field (E)
Frequency Range50 MHz to 3.5 GHz
Directional CharacteristicIsotropic, 3-dimensional
Measurement Range (CW signal > 50 MHz)38 mV / m to 11 V / m
Absolute Error (at 1 V / m and 50 MHz)plusmn 1.0 dB
Frequency Responseplusmn 1.0 dB (50 MHz to 1.9 GHz), plus mn 2.4
dB (1.9 GHz to 35 GHz)
Isotropy DeviationType. Plusmn 1.0 dB f > 50 MHz
Overload limit4.2 W / m2 (40 V / m)
Temperature Response (32 °F to 122 °F (0 °C to 50 °C))plusmn 1.5 dB
Measurement MethodDigital, triaxial measurement
Directional CharacteristicIsotropic, triaxial
Measurement Range SelectionOne continuous range
Display Resolution0.1 mV / m, 0.1 muA / m, 0.1 muW / msup2, 0.001 muW / cmsup2
Setting TimeTypically, 1s (0 % to 90 % of meas. value)
Display Refresh RateTypically, 400 mS
Display TypeLCD 4 digit
Measurement UnitsmV / m, V / m, muA / m, mA / m, muW / msup2, mW / msup2, muW / cmsup2
Measurement Display ValueInstantaneous measured value, maximum value or average value since power-on
Measurement Average Time (in per-set steps)4s to 15 minutes
Manual Data Memory and Read Storage99 sets (only recall by meter)
Battery9 V
Battery Life> 15 hours
Accessorycarrying case and manual

Reviews

There are no reviews yet.

Be the first to review “Enviro Test Construct Radiation Meter Detector”

Your email address will not be published. Required fields are marked *

Scroll to Top