Enviro Test Construct Portable Ammonia Gas Detector

This Portable Ammonia Gas Detector has a response time of ≤30 seconds, precision of ≤± 2% F.S, and a runtime of ≥ 4 hours.

SKU: ETCEPAGD-207 Category:

Features

  • Rugged and durable
  • Explosion-proof circuit design
  • Multiple security protection
  • Simultaneous measurement of multiple gases
  • Large screen display
  • Powerful function

 

Technical Specifications

Sampling MethodPump suction
Gas TypeH2S NH3, different gases, etc.
Measure Range0 to 1 ppm, 0 to 10 ppm, 0 to 50 ppm, 0 to 100 ppm, 0 to 200 ppm, 0 to 500 ppm, 0 to 1000 ppm, 0 to 2000 ppm, 0 to 5000 ppm (Range are optional)
Resolution0.001 ppm, 0.01 ppm, 0.1 ppm, 1 ppm
Response Time≤30 seconds
Precision≤± 2% F.S
LanguageEnglish (Other languages can be customized)
Automatically Test And Calibrate After Power-OnIncluding reset, maximum value (MAX), minimum value (MIN), STEL, TWA value
UnitPPM and mg/m³ can be switched
DisplayMonochrome graphics (160 x 96), screen can be automatically flipped
BacklightThe backlight time can be manually set, and will be turned on automatically when an alarm is issued
Data RecordCan store 100,000 sets data, the storage interval is adjustable from 5 to 3600 seconds, data can be exported
Alarm95dB buzzer (@30cm), vibration alarm and flashing red LED and alarm status indication on the screen, alarm latched; diagnostic alarm and battery undervoltage alarm, pump block alarm; down alarm, with early warning and optional real-time remote Bluetooth notification function
Battery3.7 V rechargeable lithium battery, battery capacity 2200 mA
Working HoursMore than 15 hours in continuous pumping mode
ChargerTravel charger with DC interface, charging time ≥ 4 hours
Explosion-Proof GradeIECEX/ATEX (II IG Ex ia IIC T4 Ga)
CNEX: Ex ia IIC T4 Ga
Certification (EU regulations)2004/108/EC (EMC)
1995/5/EC (Radio)
94/9/EC (ATEX)
Protection GradeIP67
Environmental Pressure86 to 106 Kpa
Humidity0 to 95% RH (no condensation)
Working Temperature-4 °F to 122 °F (-20 °C to 50 °C)
Size6.18 in x 3.32 in x 2.34 in (157 mm x 84.5 mm x 59.5 mm) (including back clip/water trap filter)
Weight0.79 lb. (0.36 kg) (including battery, belt clip and filter)

Reviews

There are no reviews yet.

Be the first to review “Enviro Test Construct Portable Ammonia Gas Detector”

Your email address will not be published. Required fields are marked *

Scroll to Top