Enviro Test Construct NH3 Gas Detector

Enviro Test Construct NH3 gas detector is a high-performance portable gas detector that can detect multiple gases (volatile organic compounds VOC, combustible gas and toxic gas) at the same time and has man down alarm function.

SKU: ETCRAGD-103 Category:

Overview

Enviro Test Construct NH3 gas detector is a high-performance portable gas detector that can detect multiple gases (volatile organic compounds VOC, combustible gas and toxic gas) at the same time and has man down alarm function. The device has humanized operation functions such as one-key security detection, one-key storage, automatic image flipping, as well as the man down alarm function.; With optional Bluetooth transmission function, allowing safety personnel to obtain real-time data and the alarm status. It has obtained international IECEX, ATEX explosion-proof certification and Chinese explosion-proof certification; As it passed the antistatic test, and the protection level reaches IP67; With safer product design and the module design which makes the detection faster, and the compact ergonomic design makes the device easy carrying; What’s more, the device is also a suction and diffusion dual-purpose instrument. The instrument is mainly working in suction mode. When the air pump fails or in special emergency situations, it can automatically switch to the diffusion sampling method, thereby improving the protection to a new Level.

 

Features

  • Rugged and durable
  • Explosion-proof circuit design, safe and reliable
  • Multiple security protection
  • Simultaneous measurement of multiple gases, multiple numerical display
  • Powerful function, more user-friendly operation

 

Technical Specifications

Sampling MethodPump suction & diffusion dual-use type
Gas TypeH2S, Hydrogen Sulfide CO2, Carbon Dioxide O3, Ozone NH3, Ammonia etc.
Measure RangeCustomized
Response Time≤ 30 seconds
Precision≤ ± 2 % F.S
LanguageEnglish
Automatically Test And Calibrate After Power-OnIncluding reset, maximum value (MAX), minimum value (MIN), STEL, TWA value
UnitPPM and mg can be switched
DisplayMonochrome graphics (160 in x 96 in) screen can be automatically flipped
BacklightThe backlight time can be manually set, and will be turned on automatically when an alarm is issued
Data RecordCan store 100,000 sets data, the storage interval is adjustable from 5 to 3600 seconds, data can be exported
Alarm95 dB buzzer, vibration alarm and flashing red LED and alarm status indication on the screen, alarm latched;
Diagnostic alarm and battery undervoltage alarm, pump block alarm;
Man, down alarm, with early warning and optional real-time remote Bluetooth notification function
Battery3.7 V rechargeable lithium battery, battery capacity 2200 mA
Working HoursMore than 15 hours in continuous pumping mode
ChargerTravel charger with DC interface, charging time ≥ 4 hours
Explosion-Proof GradeIECEX/ATEX (II IG Ex ia IIC T4
CNEX:Ex ia IIC T4 Ga
Certification
(EU Regulations)
2004 or 108 or EC(EMC)
1995 or 5 or EC (Radio)
94 or 9 or EC (ATEX)
Protection GradeIP67
Working Temperature-4 ℉ to 122 ℉ (-20 ℃ to +50 ℃)
Humidity0 % RH to 90 % RH (no condensation)
Environmental Pressure86 Kpa to 106 Kpa
Size6.18 in × 3.32 in × 2.34 in (157 mm x 84.5 mm x 59.5mm)
Weight0.80 lb (0.365 kg) including battery, belt clip and filter

Reviews

There are no reviews yet.

Be the first to review “Enviro Test Construct NH3 Gas Detector”

Your email address will not be published. Required fields are marked *

Scroll to Top