Enviro Test Construct Multiparameter Water PH Meter

This Multiparameter PH meter has a PH range of – 2.000 to 20.000 pH, a resolution Temperature of 0.1°F and a memory capacity of Stores up to 500 data sets.

SKU: ETCRPHM-219 Category:

Technical Specifications

Range– 2.000 to 20.000 pH
Range-1999.9 -1999.9 mV
Measurement ModesmV and Relative mV
Range0 to 19999 ppm, mg/L, mol/L (Depending On Range of ISE)
Calibration Solutions0.001, 0.01, 0.1, 1, 10, 100, 1000, WOOO ppm, mol/L, mg/L
Range0-20.00, 200.0, 2000卩S/cm, 20.00, 200.0 mS/cm
Calibration Solutions10pS/cm, 84pS/cm,1413pS/cm,12.88mS/cm,111.8mS/cm
Range0 to 100ppt (Max. 200ppt, Depending On Factor Setting)
TDS Factor0.1-1.0 (Default 0.5)
Range0-1 Oppt (Max. 80ppt)
Measurement ModesSeawater Or Practical Salinity
Range0 to 100MQ
Resolution0.01, 0.1, 1
Concentration Range0.00-20. OOmg/L (Or ppm)
Pressure Correction60.0 to 112.5 kPa, 450 to 850 mmHg
Range0 to 105。32~221平
Resolution0.1°C or 0.1°F
MemoryStores Up to 500 Data Sets

Reviews

There are no reviews yet.

Be the first to review “Enviro Test Construct Multiparameter Water PH Meter”

Your email address will not be published. Required fields are marked *

Scroll to Top