Enviro Test Construct Digital Electrical Conductivity

This Digital electrical conductivity has protection level IP 65, three control contacts,5 A 250 V AC,5 A 30 V DC and stability ± 0.2 % F.S per 24h.

SKU: ETCHCM-255 Category:

Features

  • Colour LCD Display
  • Intelligent menu operation
  • Data Recording & Curve Display
  • Manual or automatic temperature compensation
  • Three sets of relay control switches
  • High & low alarm and hysteresis control
  • 4 mA to 20 mA & RS 485 Multiple output modes.
  • Display measurements, temperature, state, etc. on the same interface
  • Password protection function to prevent misoperation by non staff

 

Technical Specifications

Protection LevelIP 65
Two Current Outputs0 per 4 mA to 20mA (load resistance<750 Ω); 20 mA to 4 mA ( load resistance < 750 Ω)
Signal OutputRS 485 MODBUS RTU
Three Sets Of Relay Control Contacts5 A 250 V AC,5 A 30 V DC
Stability± 0.2 % F.S per 24h
Power Supply85 to 265 V AC ± 10 %, 50 ± 1Hz, power ≤ 3 W; 9 to 36 V DC, power consumption ≤ 3 W
Measuring RangeConductivity:0 mS per cm to 2000 mS per cm;
TDS: 0 g per L to 1000 g per L
Concentration: Please see the built-in chemical concentration table
Temperature: – 14 °F to 302 °F (- 10 ºC to 150.0 ºC)
ResolutionConductivity:0.01 μS per cm ;0.01 mS per cm;
TDS:0.01 mg per L; 0.01 g per L
Concentration: 0.01%;
Temperature: 32.18 °F (0.1 ºC)
Basic Error± 0.5 % F.S;
Temperature:± 32.54°F (± 0.3 ºC);
Concentration:± 0.2 %
Dimensions5.67 in x 5.67 in x 4.65 in (144 mm  x144 mm  x 118 mm)
InstallationPanel, wall mounting and pipeline ;
Panel opening size:5.43 in x 5.43 in (138 mm x138 mm)
Working EnvironmentOperating temperature: 14 °F to 140 °F (-10 ºC to 60 ºC);
Relative humidity:  ≤ 90 %;
Weight1.76 lb (0.8kg)

Reviews

There are no reviews yet.

Be the first to review “Enviro Test Construct Digital Electrical Conductivity”

Your email address will not be published. Required fields are marked *

Scroll to Top