Enviro Test Construct DC System Earth Fault Tester

This DC System Earth Fault Tester has a voltage of 24 V to 280 V measurement voltage range of 0 V to 300 V and temperature of 14 ℉ to122 ℉.

SKU: ETCDCGFL-232 Category:

Technical Specifications

Working Voltage3.7 V (Lithium battery)
Working MethodTouch screen
Branch Grounding Resistance Range0 kΩ  to 999 kΩ (Factory default: 300 kΩ)
Branch Grounding Resistance Accuracy0 kΩ  to 150 KΩ: ≤ 10% ± 2 kΩ

0 kΩ  to 150 KΩ: ≤ 10% ± 2 kΩ 150 kΩ  to 999 kΩ: Display specific value

Ground Resistance Measurement Resolution0.1 KΩ
Leakage Current Detection Sensitivity≤0.1 uA
Measurement Accuracy100%
Alarm ModeGraphics, data, grounding direction
Voice AlarmGrounding, mutual channeling, measured value, fault direction
Waveform DisplayStandard sine wave (similar to oscilloscope)
Pliers JudgmentAutomatic identification of large and small pliers, opening and closing state
Continuous Working TimeMore than 10 h
Working Power SupplyLithium battery (3.7 V, 4000 mAh rechargeable)
Suitable Temperature14 ℉ to122 ℉ (-10 ℃ to +50 ℃)
Dimensions (Length × Width × Height)7.08 in × 3.93 in × 1.57 in (180 mm × 100 mm × 40 mm)
Weight3.30 lb (1.5 kg)

Reviews

There are no reviews yet.

Be the first to review “Enviro Test Construct DC System Earth Fault Tester”

Your email address will not be published. Required fields are marked *

Scroll to Top