| Conductivity Measurement Range | 0.01 ms/cm to 20.00 ms/cm and 200.0 ms/cm and 2000 ms/cm and 20.00 mS/cm2 and 200 mS/cm2 |
| Accuracy | ±0.5% F.S. |
| Resolution | 0.001 and 0.01 and 0.1 and 1 |
| Calibration Points | 1 to 5 Points |
| Calibration Solution | 10 µS/cm and B4 µS/cm and 1413 µS/cm and 12.88 mS/cm and 111.8 mS/cm or User-Defined |
| TDS Measurement Range | 0 ppm to 10.00 ppm and 100.0 ppm and 1000 ppm 10.00 ppt and 100 ppt (Max. 200 ppt) |
| Accuracy | 1% FS |
| Resolution | 0.01, 0.1, 1 |
| TDS Factor | 0.01 to 1.00 (Default 0.5) |
| Salinity Measurement Range | 0.00 ppt to 80.00 ppt and 0.00 psu to 42.00 psu |
| Accuracy | 1% FS |
| Resolution | 0.01, 0.1, 1 |
| Measurement Modes | Practical Salinity (Psu) or Natural Seawater (Ppt) |
| Resistivity Measurement Range | 0.00 MQ to 20 ΜΩ |
| Accuracy | 1% FS |
| Resolution | 0.01, 0.1, 1 |
| Temperature Measurement Range | 32 °F to 221 °F (0 °C to 105 °C) |
| Accuracy | 0.9 °F (0.5 °C) |
| Resolution | 0.1 °F (0.1 °C) |
| Calibration Points | 1 Point |
| General Temperature Compensation | 32 °F to 212 °F (0 °C to 100 °C), Manual or Automatic |
| Cell Constant | K-0.1, 1, 10 or User-defined |
| Temperature Coefficient | Linear and Pure Water Compensation |
| Reference Temperature | 77 °F (25 °C), 68 °F to 77 °F (20 °C or 25 °C) |
| Hold Function | Manual or Automatic Endpoint Detection |
| Stability Criteria | Low or High |
| Calibration Due Alaram | 1 to 31 days |
| Power Off | Manual or Automatic (10 min and 20 min or 30 min After Last Key Pressed) |
| Memory | Stores Up to 50 Data Sets |
| Output | USB Communication Interface |
| Connector | 6-pin Mini Plug |
| Power Requirement | 3 V x 1.5 V AA Batteries or DC 5 V Power Adapter |
| Dimension | 6.69 in × 3.34 in × 1.18 in (170 mm x 85 mm × 30 mm) |
| Weight | 0.62 lb. (300 g) |
Reviews
There are no reviews yet.