Enviro Test Construct Carbon Monoxide Gas Detector Sensor

This Carbon Monoxide Gas Detector Sensor detects gases namely H2S,CH4, CO, and O2 with temperatures ranging from -4 °F to 122 °F, an IP67 protection.

SKU: ETC-CMGD-136 Category:

Features

  • Rugged and durable
  • Explosion-proof circuit design, safe and reliable
  • Multiple security protection
  • Simultaneous measurement of multiple gases, multiple numerical display
  • Large screen display, flexible detection system, multiple filtering devices
  • Powerful function, more user-friendly operation

 

Technical Specifications

Sampling methodPump suction
Gas typeCarbon monoxide (CO), Hydrogen Sulfide(H2S), Oxygen(O2), Combustible gas (LEL), other gases can be customized.
Measure rangeCO: 0 PPM TO 1000 PPM / 0 PPM TO 2000 PPM, H2S: 0 PPM TO 100 PPM / 0 PPM TO 200 PPM /0 PPM TO 500 PPM, O2: 0% TO 30% VOL / 0% TO 25% VOL, EX: 0% TO 100% LEL / 0% TO 100%VOL, other measure ranges can be customized.
ResolutionCO: 1 PPM, H2S: 0.1 PPM, O2: 0.1% VOL, EX: 1% LEL, according to sensors.
Response time30 s
Precision± 2% F. S
LanguageEnglish, Russian (Other languages can be customized)
Automatically test and calibrate after power-onIncluding reset, maximum value (MAX), minimum value (MIN), STEL, TWA value
UnitPPM and mg/m³ can be switched
Displaymonochrome graphics (160 x 96), screen can be automatically flipped
BacklightThe backlight time can be manually set, and will be turned on automatically when an alarm is issued
Data recordCan store 100,000 sets data, the storage interval is adjustable from 5 s to 3600 s, data can be exported
Alarm95 dB buzzer vibration alarm and flashing red LED and alarm status indication on the screen, alarm latched
Battery3.7 V rechargeable lithium battery, battery capacity 2200 mA
Working hoursMore than 15 hours in continuous pumping mode
ChargerTravel charger with DC interface, charging time ≥ 4 hour
Explosion-proof gradeIECEX/ATEX (II IG Ex ia IIC T4 Ga)
CNEX: Ex ia IIC T4 Ga
Certification   (EU regulations)
2004/108/EC (EMC)
1995/5/EC (Radio)
94/9/EC (ATEX)
Protection gradeIP 67 / IP 68
Working temperature-4 °F to 122 °F (-20 ºC to +50 ºC)
Humidity0% RH to 90% RH (no condensation)
Environmental pressure12.48 psi to 15.37 psi (86 Kpa to 106 Kpa)
Size6.18 in x 3.32 in x 2.34 in (157 mm x 84.5 mm x 59.5mm) (including back clip/water trap filter)
Weight0.8 lb (365 g) (including battery, belt clip and filter)

Reviews

There are no reviews yet.

Be the first to review “Enviro Test Construct Carbon Monoxide Gas Detector Sensor”

Your email address will not be published. Required fields are marked *

Scroll to Top