Enviro Test Construct Ammonia Gas Detector

This Ammonia Gas Detector has a 2.3 in TFT large color screen display, a ≤ ± 1% (FS or year) zero drift, and a IP65 protection level.

SKU: ETCRAGD-116 Category:

Features

  • Multiple gas sensors can be turned on or off independently
  • Diffusion measurement method, short response time
  • Intelligent temperature and humidity and zero compensation algorithm
  • 3 in full-color display, large and clear background light
  • Support PPM and mg or m3, %VOL and mg or L concentration units
  • Standard configuration of 2000 mAh lithium battery
  • First-class mechanical design, high-strength wear-resistant
  • polycarbonate casing, strong waterproof and anti-corrosion
  • anti-electromagnetic radiation, automatic storage
  • Automatically according to the number of sensors
  • The screen display content can be inverted and inverted (optional)
  • Support measurement data download

 

Technical Specifications

Detection GasAmmonia in the air
Detection PrinciplePrinciple of electrochemistry
Measuring Range0 to 10 ppm, 0 to 20 ppm, 0 to 50 ppm, 0 to 100ppm, 0 to 200 ppm optional
Resolution0.01 ppm (0 to 100 ppm); 0.1 ppm (0 to 1000 ppm); 1 ppm (1000 ppm or more)
Support SensorCatalytic combustion sensor, electrochemical sensor any combination, flexible configuration
Combination MethodSingle, two-in-one, three-in-one, four-in-one optional (one flammable gas sensor in four-in-one) Two-in-one sensor can be turned on or off independently to avoid gas interference and prolong sensor life.
Sampling MethodDiffusion detection method
Indication Error≤ ± 3% FS (more precise requirements depending on sensor performance)
Repetitive≤ ± 1%
Zero drift≤ ± 1% (FS or year)
Response Time≤ 30 seconds (T90), (higher requirements depending on sensor performance)
Recovery Time≤ 30 seconds (higher requirements depending on sensor performance)
Shell MaterialHigh-strength wear-resistant polycarbonate casing
BatteryRechargeable lithium battery 2000 mAh, support mobile power supply and charging
ChargerUSB high current 5 V 2.1 A fast charger, compatible with universal USB mobile phone charger
Alarm ModeAudible alarm 95 dB at 11.8 in (30 cm), vibration alarm, red LED warning light
Alarm Point SettingA1 alarm value, A2 alarm value; TWA alarm value, STEL alarm value can be set separately
Display2.3 in TFT large color screen
Button4 button navigation
Direct ReadingMeasured value, data record status, maximum, minimum, average
Data RecordAutomatically store data, storage interval can be customized, can continuously store 300,000 groups of data with date and time
Data DownloadSupport USB measurement data download;
Data PrintingSupport for mini portable printer Bluetooth wireless printing (optional)
CalibrationLevel 2 to 4 target point calibration function, can set calibration value, one key zero adjustment
Explosion-Proof GradeEx ia IIC T4 Ga (intrinsically safe)
Protection LevelIP65
Operating ModeUser mode, administrator mode, two operating modes are available
Operating Temperature-4 °F to 122 °F (-20 ℃ to 50 ℃)
Working Humidity0 to 95% relative humidity (non-condensing)
Executive StandardGB 12358-2006, GB 3836.1-2010, GB 3836.4-2010
SizeLength 2.59 in x 4.72 in x 1.18 in (66 mm x 120 mm x 30 mm)
WeightAbout 0.26 lb. to 0.39 lb. (0.12 kg to 0.18 kg)

Reviews

There are no reviews yet.

Be the first to review “Enviro Test Construct Ammonia Gas Detector”

Your email address will not be published. Required fields are marked *

Scroll to Top