Clamp-On Ultrasonic Flow Meter for Small Pipes – Enviro Test Construct

Ultrasonic flow meter with clamp-on design, Modbus RS485, IP65 protection, and easy installation for DN 15-40 pipes without pipe modification. 

SKU: ETCCM-116 Category:

Overview

Enviro Test Construct Clamp-On Ultrasonic Flow Meter for Small Pipes the first choice for small pipe diameters of DN 15 to DN 40: simple installation and convenient operation. There is no need to break the pipe or stop the construction for a long time, and the installation can be easily completed in a few minutes. The device adopts a new clip-on design that does not touch the measuring medium. It can avoid pressure loss and medium pollution caused by traditional flow meters. A variety of modes can be set, flexible and diverse. A set of machines can measure all calibers in the general range and is suitable for a variety of metal pipes and resin pipes. It can be selected as an ultrasonic cooling (heating) meter to monitor and measure energy consumption. 

 

Features

• Large-screen LCD
• Non-contacting measuring
• Built-in data-logger
• Built-in rechargeable battery
• High accuracy measuring
• Wide measuring range
• Small and light
• RS-232 serial interface

 

Technical Specifications

Linearity0.5 %
Repeatability0.2 %
Accuracy±1 % of reading at rates>0.2 mps
Response Time0 to 999 seconds, user-configurable
Velocity±32 m/s
Pipe Size0.59 in to 236 in (15 mm to 6000 mm)
Totalizer7-digit totals for net, positive and negative flow respectively
Liquid TypesVirtually all liquids
SecuritySetup values Modification Lockout. Access code needs unlocking
Display4 x 8 Chinese characters or 4 x 16 English letters
Communication InterfaceRS-232, band-rate: from 75 to 57600. Protocol made by the manufacturer and compatible with that of the FUJI ultrasonic flow meter. User protocols can be made on enquiry.
Transducer Cord LengthStandard 196.85 in x 78.7 in (5000 mm x 2000 mm),optional 393.7 in x 78.7 in (10000 mm x 2000 mm)
Power Supply3 AAA built-in Ni-H batteries. When fully recharged it will last over 12 hours of operation. 100V-240VAC for the charger
Data LoggerBuilt-in data logger can store over 2000 lines of data
Manual Totalizer7-digit press-key-to-go totalizer for calibration
Housing MaterialABS
Case Size8.26 in x 3.54 in x 1.18 in (210 mm x 90 mm x 30mm)
Handset Weight 1.1 lb. (500 g) with batteries

Reviews

There are no reviews yet.

Be the first to review “Clamp-On Ultrasonic Flow Meter for Small Pipes – Enviro Test Construct”

Your email address will not be published. Required fields are marked *

Scroll to Top