| Sample Modes | Real-Time Sample |
| Normal | Normal data only |
| Peak Detect | High-frequency and Randon glitch capture |
| Average | Waveform Average, selectable 4, 8, 16, 32, 64, 128 |
| Inputs |
| Inputs Coupling | AC, DC, GND |
| Inputs Impendence | 1 MΩ ± 2 % or 20 pF ± 3 pF |
| Probe Attenuation | 1 X, 10 X |
| Supported Probe Attenuation Factor | 1 X, 10 X, 100 X, 1000 X |
| Maximum Input Voltage | CAT I and CAT II: 300 VRMs (10 ×), Installation Category; |
| CAT III: 150 VRMs (1 ×) |
| Horizontal System |
| Sample Rate Range | 1 GS/s |
| Waveform Interpolation | (Sin x)/x |
| Record Length | 78.74 in (2 m) |
| SEC/DIV Range | 4 ns/div to 2000 s/div, in a 2, 4, 8 sequence | 2 ns/div to 2000 s/div, in a 2, 4, 8 sequence |
| Sample Rate and | ± 50 ppm over any ≥ 1 mm’s time interval |
| Delay Time Accuracy |
| Scanning Speed Range | 4 ns/div to 8 ns/div; (-8 div x s/div) to 40 mms; | 2 ns/div to10 ns/div;(-4 div × s/div) to 20 mms; |
| 20 ns/div to 80 μs/div;(-8 div × s/div) to 40 mms; |
| 200 μs/div to 40 s/div;(-8 div × s/div) to 400s; |
| Delta Time Measurement Accuracy | Single-shot, Normal mode: ± (1 sample interval +100 ppm × reading + 0.6 ns); |
| (Full Bandwidth) | >16 averages: ± (1 sample interval + 100 ppm × reading + 0.4 ns); |
| | Sample interval = s/div ÷ 200 |
| Vertical System |
| Vertical Resolution | 8-bit resolution, all channel sampled simultaneously |
| Volts Range | 2 mV/div to 100 V/div at input BNC |
| Bandwidth | 70 MHz | 100 MHz | 150 MHz | 200 MHz |
| Rise Time at BNC (typical) | 5 ns | 3.5 ns | 2.3 ns | 1.8 ns |
Reviews
There are no reviews yet.