Enviro Test Construct Rechargeable Radiation Meter Tester

This Rechargeable Radiation Meter Tester has a frequency range of 10 MHz to 8 GHz, battery operation time of > 10 hours, and absolute error of ± 1.0 dB.

SKU: ETCIRM-207 Category:

Features

  • Frequency range 10 MHz to 8.0 GHz
  • 3 axis isotropic measurements of EMF
  • Non-directional (isotropic) measurement with three-channel measurement probe
  • High dynamic range
  • Configurable alarm threshold and memory function
  • Easy & safety to use
  • High frequency (RF) electromagnetic wave field strength measurement
  • Mobile phone base station antenna radiation power density measurement
  • Wireless communication applications (CW, TDMA, GSM, DECT)
  • RF power measurement for transmitters
  • Wireless LAN (Wi-Fi) detection, installation
  • Spy camera, wireless bug finder
  • Cellular or Cordless phone radiation safety level
  • Microwave oven leakage detection
  • Personal living environment EMF safety

 

Technical Specifications

Sensor TypeElectric field (E)
Frequency Range10 MHz to 8 GHz
Directional CharacteristicIsotropic, 3-dimensional
Measurement Range20 mV / m to 108.0 V / m
(CW Signal > 10 MHz)53 mA / m to 286.4 mA / m
1 μW or m2 to 30.93 W / m2
0 μW / cm2 to 3.093 mW / cm2
Absolute Error
(at 1 V / m and 10 MHz)
± 1.0 dB
Frequency Response± 1.0 dB (10 MHz to 1.9 GHz)
(Considering Typ. CAL Factor)± 2.4 dB (1.9 GHz to 8 GHz)
Isotropy DeviationType. ± 1.0 dB f > 10 MHz
Overload Limit10.61 mW / cm2 (200 V / m)
Temperature Response
(32 °F to 122 °F (0 °C to 50 °C))
± 0.5 dB
Measurement MethodDigital, triaxial measurement
Directional CharacteristicIsotropic, triaxial
Measurement Range SelectionOne continuous range
Display Resolution0.1 mV / m, 0.1 μA / m, 0.1 μW / m2, 0.001 μW / cm2
Setting TimeTypically, 1s (0 % to 90 % of meas. value)
Display Refresh RateTypically, 0.5 Sec
Display TypeLCD 4 digit
Audible AlarmBuzzer
Measurement UnitsmV / m, V / m, μA / m, mA / m, μW / m2, mW / m2, μW / cm2
Measurement Display ValueInstantaneous measured value, maximum value,
average value or maximum average value
Measurement Alarm FunctionAdjustable threshold with ON/OFF
Measurement Calibration Factor CALAdjustable
Manual Data Memory and Read Storage99 sets (only recall by meter)
Rechargeable Lithium-ion Battery3.6 v,1940 mAh
charging time approx.3 hours
Battery Operation Time> 10 hours
Accessorycarrying case, manual, AC adaptor (DC 5 V 1.5 A), Rechargeable lithium-ion battery
DimensionsApprox. 2.64 in × 2.36 in × 9.72 in (67 mm x 60 mm x 247 mm)
WeightApprox. 8.818 oz (250 g) (including battery)

Reviews

There are no reviews yet.

Be the first to review “Enviro Test Construct Rechargeable Radiation Meter Tester”

Your email address will not be published. Required fields are marked *

Scroll to Top