Overview
Enviro Test Construct Radiation Meter is specially designed to measure x, y radiation meter rate in all kinds of radioactive working areas. In comparison with similar meter in China, this meter has a wider measuring range of dose rate. It has been widely used in hygiene department, environmental protection, metallurgy, petroleum, chemical industry, radioactive laboratories, commodity inspection etc.
Features
- High sensitivity, wide measuring range, good energy response
- High speed low power consumption microprocessor
- Digital and gauge double display
- English interface display
- LCD digi display
- Battery Indicator
- 60000 group data can be saved
- Dose rate and total doses can be measured
- With two levels of dose rate threshold alarm function.
- Battery Indicator Lightweight and ergonomic design of ABS and aluminum alloy shell
- Protect the operation personnel of long design, standard 40 cm in length, the longest can choose extended to 100 cm
- Waterproof seal protection case
- Universal replaceable type 18650 lithium battery in the handle.
- It can be charged through type-C USB interface
Technical Specifications
| Sensibility | 1 μSv / h> 350 CPS |
| Energy threshold value | 35 keV |
| Dose rate | 0.01 μSv/h to 500.00 μSv/h |
| Accumulative dose | 0.00 μSv to 99999 μSv |
| Energy threshold value | 35 keV |
| Sensibility | 1 μSv/h>350CPS |
| Energy response | +30% (relative to 37Cs) |
| Energy range | 40 keV to 3 MeV |
| Relative error | <10% |
| Measurement time | 1 s to 250 s programmable |
| Alarm threshold | Programmable within range |
| Display | Dose rate nSv /h, uSv/h, nGy/h |
| Accumulative dose | μsv |
| Counting rate | CPS |
| Power source | 18650 lithium battery charge by type-c USB |
| Power | 100mW (not contains backlighting power consumption) |
| Detector | 1.18 in x 0.98 in (30 mm ×25 mm), Nal |
| Size | 15.74 in x 7.87 in x 2.95 in (400 mm x 20 mm × 7.5 mm) |
| Weight | 2.20 lb (1.0 kg contain battery) |
Reviews
There are no reviews yet.