Single Gas Detector with LCD Display, Alarm & Data Storage – Enviro Test Construct

High-precision single gas detector with LCD display, sound-light alarm, data logging, RS485/4-20mA output, and optional backup battery for safety.

SKU: ETC-HSGD-164 Category:

Overview

These series are single-gas detectors. When the concentration of the gases in the operating site reaches or exceeds the preset value, it will send a sound and light alarm. International standard 4-20mA signal output, can be directly connected to the factory DCS system(optional); RS485 digital signal can be connected with the factory’s principal computer(optional).

 

Features

  • Adopts advanced embedded micro controller(16 digit ultra-low power consumption )
  • 128*64 dot matrix ultra-large LCD
  • The user can set the alarm level
  • Displaying the time of the first alarm
  • Real-time clock
  • Replaceable modularized sensor
  • Automatic calibration function reduces the measuring error.
  • Automatically save alarm data for 1000 articles
  • standby battery can work more than 100 hours under the condition that there is no alarm (optional)
  • standard signal(4-20mA) can be directly connected to the factory’s DCS system (optional)
  •  digital signal is connected to the factory’s principal computer (optional)

 

Technical Specifications

Detecting GasCO (Carbon Monoxide)
Sensor Life2–3 Years
Measurement Deviation≤ ±3% Full Scale (F.S.)
Response Time (T90)< 30 seconds
Display Type128 × 64 Dot Matrix Ultra-Large LCD
Alarm LevelsLow & High; User-Defined Thresholds
Alarm OutputRelay Output: AC 220V / 2A
Signal Output (Optional)4–20 mA Standard Signal Output Direct DCS System Integration
Digital Output (Optional)RS485 Digital Signal for Remote System / SCADA Interface
Working TemperatureToxic Gas Detection: -20°C to +50°C (-4°F to 122°F) Combustible Gas: -40°C to +70°C (-40°F to 158°F)
Working Humidity< 90% RH (Non-Condensing)
Working VoltageAC 220V / 50Hz
Spare Battery (Optional)≥100 hours standby (alarm inactive); ≥8 hours for combustible gas detection
Sensor ModuleReplaceable, modular design
CalibrationAutomatic Calibration Supported
Real-Time ClockYes
Alarm Log StorageStores up to 1000 alarm records automatically
Embedded ControllerAdvanced 16-bit Ultra Low Power Microcontroller
Protection GradeIP65
WeightApprox. 1.2 kg (2.65 lb)

Reviews

There are no reviews yet.

Be the first to review “Single Gas Detector with LCD Display, Alarm & Data Storage – Enviro Test Construct”

Your email address will not be published. Required fields are marked *

Scroll to Top