Enviro Test Construct NH3 Gas Meter

Enviro Test Construct NH3 gas meter is a portable gas detector which can show real-time data and send alarms when the reading reaches the set value.

SKU: ETCBAGD-212 Category:

Overview

Enviro Test Construct NH3 gas meter is a portable gas detector which can show real-time data and send alarms when the reading reaches the set value. The device is a suction and diffusion dual-purpose instrument. When the pump fails to work, it can automatically switch to the diffusion sampling mode. It also with back clip so the user can conveniently carry it. It is with the data log function. Which is not only able to store data on a device but also transfer data to PC by USB wire. It is IECEX, ATEX explosion-proof certified, and its protection level reaches IP67.

 

Features

  • Durable and sturdy, resistant to falling
  • The main body can effectively resist a 3-meter drop
  • Protection level reaches IP67
  • Through EMC anti-static interference testing
  • Explosion-proof circuit design, safe and reliable
  • Multiple security protection
  • Simultaneous measurement of multiple gases, multiple numerical displays
  • Can simultaneously detect 1 gas to 5 gases
  • Real-time value, TWA, STEL, MAX, MIN multiple numerical displays
  • Powerful function, more user-friendly operation
  • The screen can automatically flip 180 degrees
  • Pump suction and diffusion dual use
  • Equipped with a water trap filter, filtering water, oil, and dust impurities
  • Optional Bluetooth function for real-time data transmission to mobile or PC devices
  • Optional mobile app function for viewing real-time data on the phone
  • Unique modifiable ID identification function

 

Technical Specifications

Sampling MethodPump suction and diffusion dual-use type
Gas TypeNH3
Measure Range0 to 100, 200, 500, 1000 PPM
Sensor PrincipleElectrochemical principles
Resolution0.01 PPM; 1 PPM
Response Time≤ 30 seconds
Accuracy≤ ± 2% FS
Automatically Test And Calibrate After Power-ONIncluding reset, maximum value (MAX), minimum value (MIN), STEL, TWA value
Measure UnitPPM and mg/m³ can be switched
DisplayMonochrome graphics (160 x 96), screen can be automatically flipped
BacklightThe backlight time can be manually set, and will be turned on automatically when an alarm is issued
Data RecordCan store 100,000 sets data, the storage interval is adjustable from 5 to 3600 seconds, data can be exported
Alarm95 dB buzzer 11.8 in (30 cm), vibration alarm and flashing red LED and alarm status indication on the screen, alarm latched; diagnostic alarm and battery undervoltage alarm, pump block alarm; man, down alarm, with early warning and optional real-time remote Bluetooth notification function
Battery3.7 V rechargeable lithium battery, battery capacity 2200 mA
Working HoursMore than 15 hours in continuous pumping mode
ChargerTravel charger with DC interface, charging time ≥ 4 hours
Explosion-Proof GradeIECEX or ATEX (II IG Ex Ia IIC T4
CNEX: Ex Ia IIC T4 Ga
Protection GradeIP67
Humidity0% RH to 90% RH (no condensation)
Environmental Pressure86 Kpa to 106 Kpa
Working Temperature-4 °F to 122 °F (-20 °C to 50 °C)
Size6.18 in x 3.32 in x 2.33 in (157 mm x 84.5 mm x 59.5 mm)
Weight0.79 lb (0.36 Kg)

Reviews

There are no reviews yet.

Be the first to review “Enviro Test Construct NH3 Gas Meter”

Your email address will not be published. Required fields are marked *

Scroll to Top