Enviro Test Construct Waterproof Industrial Portable Multi-Gas Detector – Protection Grade IP67

Enviro Test Construct waterproof industrial portable multi gas detector – protection grade IP67 is a portable gas detector which can show real-time data and send alarms when the reading reaches the set value.

SKU: ETCIMGD-101 Category:

Overview

Enviro Test Construct waterproof industrial portable multi gas detector – protection grade IP67 is a portable gas detector which can show real-time data and send alarms when the reading reaches the set value. The device is a suction and diffusion dual purpose instrument. When the pump fails to work, it can automatically switch to the diffusion sampling mode. It also comes with a back clip so the user can conveniently carry it. It is IECEX, ATEX explosion-proof certified. It is with a data log function. Which is not only able to store data on device but also transferring data to PC by USB wire.

 

Technical Specifications

Sampling MethodPump suction & diffusion dual-use type
Gas TypeCO, H2S, O2, CH4
Measure RangeCO: 0 ppm to 1000 ppm, H2S: 0 ppm to 100 ppm, O2: 0 % VOL to 30 % VOL, CH4: 0 % LEL to 100 % LEL
ResolutionCO: 1 ppm, H2S: 0.01 ppm, O2: 0.01 % VOL, CH4: 1 % LEL
Response Time≤ 30 seconds
Precision≤ ± 2 % F. S
Automatically Test and Calibrate After Power-onIncluding reset, maximum value (MAX), minimum value (MIN), STEL, TWA value
UnitPPM and mg/m³ can be switched
DisplayMonochrome graphics (160 x 96), screen can be automatically flipped
BacklightThe backlight time can be manually set, and will be turned on automatically when an alarm is issued
Data RecordCan store 100,000 sets data, the storage interval is adjustable from 5 seconds to 3600 seconds, data can be exported
Alarm95 dB buzzer, vibration alarm and flashing red LED and alarm status indication on the screen, alarm latched; diagnostic alarm and battery under voltage alarm, pump block alarm; man, down alarm, with early warning and optional real-time remote Bluetooth notification function
Battery3.7 V rechargeable lithium battery, battery capacity 2200 mA
Working HoursMore than 15 hours in continuous pumping mode
ChargerTravel charger with DC interface, charging time ≥ 4 hours
Explosion-proof GradeIECEX/ATEX (II IG Ex IA IIC T4
CNEX:Ex ia IIC T4 Ga
Protection GradeIP67
Humidity0 % RH to 90 % RH (no condensation)
Environmental Pressure12.47 psi to 15.37 psi (86 Kpa to 106 Kpa)
Working Temperature– 4 °F to 122 °F (- 20 ºC to + 50 ºC)
Size6.18 in x 3.33 in x 2.34 in (including back clip/water trap filter)
(15.7 cm x 8.45 cm x 5.95 cm)
Weight12.87 oz (365 g) (including battery, belt clip and filter)

Reviews

There are no reviews yet.

Be the first to review “Enviro Test Construct Waterproof Industrial Portable Multi-Gas Detector – Protection Grade IP67”

Your email address will not be published. Required fields are marked *

Scroll to Top