Overview
Enviro Test Construct low voltage pipe cable fault location system has although low voltage cable and distribution cable have relatively low voltage, the fault’s location is more difficult than HV cable because of the larger quantity lines and bad environment. Because of common HV surge generator’s high output is over the max withstand voltage of LV cable, which is very easy to cause new faults. T8 overcomes this problem effectively. The max output is 15 kV, but max impulse energy up to 900J which can protect the LV cable and make the recharge sound loud enough.
Technical Specifications
| DC Voltage Output | 0 kV to 15 kV continuously adjustable |
| Output Power | Peak 2000 W |
| Capacitance | 8 μf |
| Max Discharge Energy | 900 J |
| Power Supply | Lithium battery |
| Size | 19.7 in x 12 in x 18 in (500 mm × 305 mm × 457mm) |
| Weight | 65 lb (29.5 kg) |
| Low Voltage Impulse Launching Voltage | 30 V |
| Sampling Frequency | 200 MHz |
| Max Ranging Scope | 100 km |
| Dead Zone | 2m |
| Max Resolution | 0.4 m |
| Power Supply | AC 220 V, 50 Hz |
| Size | 10.7 in x 8.5 in x 3.1 in (274 mm × 218 mm × 81 mm) |
| Weight | 7.7 lb (3.5 kg) |
| Precision Of Point Positioning | 0.1 m |
| Precision Of Path Location | 0.1 m |
| Precision Of Step Voltage Method | 0.1 m Anti-noise mode: Strong noise reduction mode |
| Work Mode | Background suppression noise reduction mode Point location mode: Intelligent Acosto-Magnetic Time Difference Mode |
| Display Mode | Colour LCD |
| Power | Li-battery, 12 h standby |
Reviews
There are no reviews yet.