Enviro Test Construct Digital Oscilloscope (2 Channels PC USB)

This Digital Oscilloscope has a record length of 40 K, delay time accuracy of 50 ppm and low frequency response of less than equal to 10 Hz.

SKU: ETCWBO-206 Category:

Features

  • 200 MHz bandwidths
  • 1 GSa/s Real Time sample rate
  • Large (7.0-inch) color display, WVGA (800×480)
  • Record length up to 24 K
  • Edge/pulse width/line selectable video/slop/overtime trigger mode
  • USB host and device connectivity
  • Multiple automatic measurements
  • Four math functions, including FFTs standard
  • Provides software for PC real-time analysis

 

Technical Specifications

Bandwidth200 MHz, 100 MHz, 70 MHz
Sample RateReal time sample: 1 GS/s
Equivalent sample: 25 GS/s
Normal Acquisition ModeNormal data
Peak DetectHigh-frequency and random glith capture
AverageWaveform average, selectable 4, 8, 16, 32, 64, 128
Input CouplingAC, DC, GND
Inputs Impedance1 MΩ ± 2% ll 20pf ±3pf
Probe Attenuation1 X, 10 X, 100 X, 1000X
Maximum Input Voltage300 Vrms (10x) installation category, 150 Vrms (1x)
Installation category ll: derate 20 dB/decade above 100 KHz to 13 V peak AC at 3 MHz and above for non-sinusoidal waveforms, peak value must be less than 450 V. excursion above 300 V should be of less than 100 ms duration. RMS signal level including all DC components removed through AC coupling must be limited to 300 V. if these values are exceeded, damage to the oscilloscope may occur
Horizontal Sample Range500 MS/s to 1GS/s
Waveform InterpolationSin(x)/x
Record Length40 k
Sec/Div Range2 ns/div to 80 s/div
Sample Rate And Delay Time Accuracy±50 ppm (at over any ≥ 1 ms time interval)
Offset Range2 ns/div to 8 ns/div; (-8 div x s/div) to 20 ms
20 ns/div to 80 us/div: (-8 div x s/div) to 40 ms;
200 us/div to 80 s/div; (-8 div x s/div) to 400 s
Vertical Resolution8-bit resolution, all channels simultaneously
Position Range2 mV/div to 20 mV/div, ±400 Mv; 50 mV/div, ±2 V; 500 mV/div to 2 V/div, ±40 V; 5 V/div to 10 V/div, ±50 V
Output VoltageAbout 5 Vpp into ≥ 1 M Ω load
Frequency1 KHz
Supply Voltage100 V ACRM to 120 V ACRM (±10%), 45 Hz to 440 Hz
120 V ACRM to 240 V ACRM (±10%), 45 Hz to 66 Hz
<30 W
2 A, T rating, 250 V
AltitudeOperating below 10,000 ft (3,000 m)
Nonoperating: below 50 000 ft (15000 m)
Humidity+104 ℉ or below (+40 ℃ or below): ≤90% relative humidity
106 ℉ to 122 ℉ (42 ℃ to 50 ℃: ≤60% relative humidity
Operating Temperature32 ℉ to 122 ℉ (0 ℃ to 50 ℃)
Non-Operating Temperature-40 ℉ to 159.8 ℉ (-40 ℃ to 71 ℃)
Dimensions15.2 in x 7.9 in x 9.6 in (385 mm x 200 mm x 245 mm)
Weight4.59 Ib (2.08 Kg)

Reviews

There are no reviews yet.

Be the first to review “Enviro Test Construct Digital Oscilloscope (2 Channels PC USB)”

Your email address will not be published. Required fields are marked *

Scroll to Top