Enviro Test Construct Touch Screen Tablet Digital Oscilloscope Kit
Enviro Test Construct Touch Screen Tablet Digital Oscilloscope Kit - Image 2
Enviro Test Construct Touch Screen Tablet Digital Oscilloscope Kit - Image 3
Enviro Test Construct Touch Screen Tablet Digital Oscilloscope Kit - Image 4

Enviro Test Construct Touch Screen Tablet Digital Oscilloscope Kit

SKU: ETCDOS-106 Category:

Features

  • Digital oscilloscope, dual channel, bandwidth up to 100MHz, real-time sampling rate 1GS/s.
  • 8in (800 x 600) multi-touch LCD screen, easy to operate, is a good helper for electronic measurement
  • With normal mode and extended window mode, can zoom in for observation and detection
  • It can select up to 14-bit high precise vertical resolution, up to 40M storage depth, and 45,000 wfms/s waveform refreshing rate
  • Support USB host, USB device, LAN communication interface, low noise, small signal test is more accurate
  • Support oscilloscope + multimeter dual functions, with a variety of advanced triggering and decoding functions, easy to measure
  • Widely used in electronic production, home appliance repair, automobile repair, product development, science education, etc.

 

Technical Specifications

 Display Type 8 in (203.2 mm) Color LCD Display
 Display Resolution 800 Horizontal x 600 Vertical Pixels
 Display Color 65536 Colors, TFT
 Bandwidth 100 MHz
 Vertical Resolution (A/D) 8-Bit
 Channel 2
 Waveform Refresh Rate 45,000 wfms/s
 Real-Time Sampling Rate (Two Channels) 500 MSa/s
 Real-Time Sampling Rate (Single Channel) 1 GSa/s
 Input Coupling DC, AC, Ground
 Input Resistance 1 MΩ±2%, in parallel with 15 pF±5 pF
 Probe Attenuation Coefficient 0.001 X to 1000 X, step by 1-2-5 system
 Maximum Input Voltage 400 V (DC+AC Peak Value)
 Horizontal Scanning Range (S/Div) 2 ns/Div to 1000 s/Div
 Vertical Sensitivity (Volt/Div) Range 1 mV/Div to 10 V/Div
 Analog Bandwidth 120 MHz
 DC Gain Accuracy 1 mV, ±4%, ≥2 mV, ±3%
 Maximum Storage Depth 40 M Points (Single Channel)
 Time Base Accuracy Maximum ±10 ppm (Ambient Temperature Is 77 ºF (+25 ºC))
 Trigger Type Edge, Video, Pulse Width, Slope, Runt, Over Amplitude (Windows Trigger), Timeout, Nth Edge, Logic, I2C, SPI, RS232, CAN   (Optional)
 Decoding Type I2C, SPI, RS232, CAN
 Trigger Method Automatic, Normal, Single
 Video Trigger Signal System Support any field frequency or line frequency NTSC, PAL and SECAM broadcasting system
 Measuring Cursor Measurement Voltage Difference Between Cursors (△V), Time Difference Between Cursors (△T), Time Difference Between   Cursors & Voltage Difference (△T&△V), Automatic Cursor
 Communication Interface USB Host, USB Device; Trig Out (Pass/Fail); LAN Interface
 Power Consumption <15 W
 Multimeter Digital Display 4 Digits (Maximum display is 19999)
 Maximum Input DC Voltage 1000 V
 Maximum Input AC Voltage 750 V (Effective Value)
 Impedance 200 Ω: ±(0.8%+10digit) to 2MΩ: ±(0.5%+3digit)
 Battery 7.4 V, 8000 mAh (lasts about 5 hours when fully charged)
 Operating Temperature 32 ℉ to 104 ℉ (0 ºC to 40 ºC)
 Storage Temperature -4 ℉ to 140 ℉ (-20 ºC to 60 ºC)
 Relative Humidity ≤ 90%
 Operating Altitude 118,110.24 in (300,000 mm)
 Non-Operating Altitude 590,561.68 in (1,500,000 mm)
 Cooling Method Fan Cooling
 Dimension (WHD) 13.39 in × 6.97 in × 3.54 in (340 mm × 177 mm × 90 mm)

Reviews

There are no reviews yet.

Be the first to review “Enviro Test Construct Touch Screen Tablet Digital Oscilloscope Kit”

Your email address will not be published. Required fields are marked *

Related products

Scroll to Top