Enviro Test Construct Pen Hardness Tester

The Enviro Test Construct Pen Hardness Tester is an advanced pen hardness tester with an integrated impact device and processor.

SKU: ETCPTHT-219 Category:

Overview

The Enviro Test Construct Pen Hardness Tester is an advanced pen hardness tester with an integrated impact device and processor. At the same time, the patented double coil technology independently developed by our company makes the measuring accuracy of the instrument significantly improved. The full-angle digital probe produced by our company can be tested in any direction without manually setting the test direction. The instrument is equipped with USB interface, which can be connected to the computer to output test data and generate reports. The instrument has a simple and easy-to-use menu design that allows users to operate without instructions.

 

Features

  • Double coil wireless digital probe, repeatability up to ±2HL
  • Full Angle measurement, no need to manually set the test direction
  • High contrast digital liquid crystal
  • Can store 999 groups of test data and read
  • Users can calibrate themselves
  • Statistical data can be calculated automatically
  • With strength conversion function
  • USB interface data transmission

 

Technical Specifications

Measurement MethodsLeeb hardness measurement method
Accuracy/Repeatability± HL2 / ± HRC0.2 / ±HB2/±HV2
ShowDigital LCD display with backlight
Hardness ScaleHL / HRC / HRB/HB/HV/HS/HRA /σ b
Measuring RangeHL 100-960 / HRC1-74.7 / HRB 1.2-140 / HB28-1027 / HV45-1230 / HS4.0-112 / HRA7-88.5 / σ b(rm) 118-3315 N/mm 2
Impact DeviceD type (built-in)
Impact Direction360 degrees fully automatic
Applicable Materials10 Commonly used metal materials
Storage999 Data, can be stored and read out again
StatisticsMaximum value, minimum value, and average value are automatically calculated
CalibrationUsers can calibrate themselves
HintLow battery prompt
Power SupplyOne AA battery
Operating Temperature-4 ºF to 113 ºF (- 20 ºC to 45 ºC)
Instrument Volume (mm)5.83 in x 1.77 in x 0.83 in (148 mm x 45 mm x 21 mm)
Net weight (g)0.23 lb (105 gm)

Reviews

There are no reviews yet.

Be the first to review “Enviro Test Construct Pen Hardness Tester”

Your email address will not be published. Required fields are marked *

Scroll to Top