Enviro Test Construct Water Quality Tester PH

This Water Quality Tester pH has a 7-in touchscreen, measurement range of -1.99 pH to 19.99 pH, and resolution range of 0.1/0.01 pH.

SKU: ETCWQPH-226 Category:

Technical Specifications

Display7-in Capacitive Touchscreen
Measurement Range-1.99 pH to 19.99 pH
Measurement Conductivity0 μS/cm to 20 μS/cm, 20 μS/cm to 200 μS/cm, 200 μS/cm to 2000 μS/cm, 2 μS/cm to 20 mS/cm, 20 μS/cm to 200 mS/cm
Measurement DO0 mg/L to 20 mg/L (ppm) 0 % to 200 %
Resolution Range0.1/0.01 pH
Resolution Conductivity0.01/0.1/1 μS/cm 0.01/0.1/1 mS/cm
Resolution DO0.1/0.01 mg/L(ppm), 1/0.1%
Accuracy Range±0.02 pH
Accuracy Conductivity±0.80% FS
Accuracy DO±0.40 mg/L, ±0.3%
Stability±0.01 pH/3 h
EC Electrode Constant0.1/1/10 cm-1
EC Calibration1 Point
Residual Current≤0.1 mg/L
Salinity Compensation0 ppt to 45 ppt (Automatic)
Pressure Compensation0.8 Bar to 1.05 Bar (80 kPa to 105 kPa) (Automatic)
Automatic CalibrationFull Oxygen In The Air And Zero Air Calibration
Electrode TypePolarographic
Data Storage300 sets
Power SupplyDC 12 V/1 A (with power adapter)
CommunicationsUSB, Bluetooth
Storage ContentsSeries Number, Measuring Value Measuring Unit, and Temperature
Ambient Humidity≤85%
Temperature Range14 °F to 230 °F (-10 ℃ to 110 ℃)
Temperature Compensation32 °F to 212 °F (0 ℃ to 100 ℃)
Temperature Accuracy41 °F to 140 °F (5 ℃ to 60 ℃), ±32.9 °F (±0.5 ℃), Others: ±33.8 °F (±1.0 ℃)
Reference Temperature77 °F, 68 °F, 64.4 °F (25 ℃, 20 ℃,18 ℃)
Response Time≤30 s, 77 °F (25 ℃), 90% response
Ambient Temperature41 °F to 95 °F (5 ℃ to 35 ℃)
Dimensions9.44 in x 6.69 in x 2.75 in (240 mm × 170 mm × 70 mm)
Weight1.32 lb. (600 g)

Reviews

There are no reviews yet.

Be the first to review “Enviro Test Construct Water Quality Tester PH”

Your email address will not be published. Required fields are marked *

Scroll to Top