UVC Light Meter for 253.7nm Germicidal Lamp Intensity Measurement – Enviro Test Construct

SKU: ETCRM-426 Category:

Overview

Enviro Test Construct UVC is also known as short wave sterilization ultraviolet light. 253.7nm wavelength ultrav iolet radiation from low pressure mercury lamp is widely used in ultraviolet sterilization industry. The UV light meter is specially designed to measure UVC intensity and energy values, which is widely applied in hospitals, CDC, pharmaceutical companies, F DA, etc for UV intensity and energy measurement.

 

Features

  • Specially designed for 253.7nm UV germicidal lamps (low pressure mercury lamps).
  • Rich statistical functi ons, simultaneous display of current value, maximum value, minimum value, average value, measurement pe riod, and energy value
  • Data storage automatically before timing shutdown, which makes unattended measurements possible.
  • High precision UVC optical filters and professional UV sensor, which allow the instrument to almost give no response to other wavebands
  • Equipped with USB interface and dedicated PC software featured with parameter configuration, data reading, exporting of UV power data to EXCEL, report generation functions.
  • Advanced digital probe technology, by which analog signal conversion to digital signal on the probe.

 

Technical Specifications

Spectral Response230 nm – 280 nm, λp = 254 nm
Power Measuring Range0 – 20000 μW/cm²
Power Resolution0.1 μW/cm²
Energy Measuring Range0 – 9999999 μJ/cm²
Relative Indication ErrorH < 50 μW/cm²: 4 μW/cm², H ≥ 50 μW/cm²: 8%H (relative to NIM standard)
Long Wave Response Error60%
Cosine Characteristics Error10%
Linearity Error1%
Short-Term Instability1% (30 min after startup)
Fatigue CharacteristicsAttenuation <2%
Zero Error0.1 of full scale
Response Time< 0.5 seconds
Recording Time0 – 99999 seconds
UnitμW/cm² (default), mW/cm², W/m²
Bluetooth Transmission Distance50 meters (open area)
Instrument Size189 mm × 76 mm × 31 mm
Instrument Weight~232 grams (including batteries)
Display240 × 160 dot matrix LCD
Battery2 × AA alkaline dry batteries
Operating Temperature0°C to 40°C, <85% RH
Supply VoltageDC 5V
Operating Current20 mA
Operating Power Consumption100 mW

Reviews

There are no reviews yet.

Be the first to review “UVC Light Meter for 253.7nm Germicidal Lamp Intensity Measurement – Enviro Test Construct”

Your email address will not be published. Required fields are marked *

Scroll to Top