Enviro Test Construct Scanner Radiation Meter

This Scanner Radiation Meter has 1 min to 9999 min cumulative time, <6 hours charging time and working humidity of 5% to 95% RH no condensation.

SKU: ETCABGRM-205 Category:

Features

  • Check the local radiation leakage and nuclear radiation pollution
  • Monitoring of the ambient radiation value in the air
  • Nuclear physics research
  • Check the radioactivity of stone and other building materials
  • Check landfills and garbage dumps with nuclear radiation hazards
  • Check the radium radioactive pollution of groundwater
  • Check the radioactivity of the underground drilling pipe and equipment

 

Technical Specifications

Display UnitμSv / h, mR / h, CPS, Cumulative dose, Curve drawing
Alarm FunctionAlarm threshold can be set
Alarm ModeSound and vibration (with independent switch)
Cumulative Time1 minutes to 9999 minutes can be set
Cumulative DoseAutomatic accumulation and manual reset
Max HoldAuto hold maximum
Curve Drawing1-hour curve map, automatic calculation of maximum or average value
Measurement ModeFast and smooth modes
Working Humidity5% RH to 95% RH (no condensation)
Power ModeType-C charging port, 2200 mAh, 3.7 V 18650 lithium battery
Charging Time< 6 hours
Working Temperature(28 °F to 140 °F (-20 °C to 60 °C)
Size4.724 in x 2.283 in x 1.122 in
(120 mm x 58 mm x 28.5 mm)
Weight4.23 oz (About 120 g)

Reviews

There are no reviews yet.

Be the first to review “Enviro Test Construct Scanner Radiation Meter”

Your email address will not be published. Required fields are marked *

Scroll to Top