Enviro Test Construct Sensitive Multi-Parameter Monitor

This Sensitive Multi-Parameter Monitor has a pH range of -2 pH to 20 pH, mV resolution of 0.1 mV, and pX accuracy of ±0.01 pX.

SKU: ETCIMWA-253 Category:

Features

  • 5″ LCD display screen
  • Multi-reading: auto, timed, continuous
  • Auto/Manual temp compensation for accuracy
  • Auto-hold locks measurement endpoint
  • Data capacity: 500 sets (GLP-compliant)
  • USB communication support
  • Auto-power off for extended battery life
  • Reset restores factory default options
  • IP65 waterproof rating

 

Technical Specifications

ParameterspH/EC/ISE/DO/Temp. (mV/pX/Resistivity/TDS/Sal. /DO Saturation)
pH
Range-2 pH to 20 pH
Resolution0.1, 0.01 pH
Accuracy±0.01 pH
Calibration PointsUp to 5
Standard CustomizationYes
Calibration ReminderYes
Standard RecognitionNIST, GB and DIN buffers
Slope LimitYes
mV
Range-2000 mV to 2000 mV
Resolution0.1 mV
Accuracy±0.3 mV or ±0.1%
pX
Range-2 pX to 20 pX
Resolution0.1 pX, 0.01 pX
Accuracy±0.01 pX (±0.01 pX)
Calibration PointsUp to 5
ISE
Range1 e-9 to 9.999 e9
Unitsmol/L, mmol/L, g/L, mg/L, μg/L
ResolutionUp to 4 significant digits
Accuracy±0.5%
Calibration PointsUp to 5
Conductivity
Range0.000 μS/cm to 1000 mS/cm
Resolution0.001 μS/cm minimum
various with range selection
Accuracy±1.0% FS
Reference Temperature68 °F, 77 °F (20 °C, 25 °C)
Calibration PointsUp to 3
Standard Recognition84 μS/cm, 1413 μS/cm, 12.88 mS/cm
Resistivity
Range5 Ω·cm to 20 MΩ·cm
Resolution0.01 Ω·cm minimum
Accuracy±1.0% FS
TDS
Range0.00 mg/L to 300 g/L
Resolution0.01 mg/L minimum, 3 significant digits
Accuracy±1.0%
Salinity
Range0% to 8%
Resolution0.01%
Accuracy±0.2%
Dissolved Oxygen Concentration
Sensor Type0 mg/L to 50 mg/L
Range0 mg/L to 50 mg/L
Resolution0.01 mg/L
Accuracy±0.1 mg/L
Calibration PointsAir-saturated water or zero point
Barometric CompensationYes
Manual Salinity Factor CorrectionYes
Saturation
Range0% to 300%
Resolution0.10%
Accuracy±2%
Temperature
Range41 °F to 230 °F (-5 °C to 110 °C)
Unit°C, °F
Resolution0.1
Relative Accuracy±0.2
Measurement
Reading ModeAuto-Read (Fast, Medium, Slow), Timed, Continuous
Reading PromptsReading, Stable, Locked
Temp. CompensationATC, MTC
Data Management
Data Storage1000 Groups
GLP FeaturesYes
Inputs
pH ElectrodeBNC(Q9)
DO with Temp. Probe4-pin aviation connector
Conductivity with Temp. Probe5-pin aviation connector
Outputs
USBPC, printer
Display Options
BacklightYes
Auto Shutdown300 sec., 600 sec, 1200 sec, 1800 sec, 3600 sec., off
IP RatingIP 65
Date and TimeYes
General
PowerRechargeable Lithium battery, AC Adapter, 100 V to 240 V AC input, DC 5 V output
Dimensions3.54 in × 10.03 in × 1.57 in (90 mm x 255 mm x 40 mm)
Weight 1.1 lb. (500 g)

Reviews

There are no reviews yet.

Be the first to review “Enviro Test Construct Sensitive Multi-Parameter Monitor”

Your email address will not be published. Required fields are marked *

Scroll to Top