Enviro Test Construct Multi Parameter Water Quality Meter

This Multi Parameter Water Quality Meter has pH range of -2.000 pH to 20.000 pH, accuracy of ±0.002 pH, and 1 to 5 calibration points.

SKU: ETCWQIM-225 Category:

Features

  • 3.5″ backlit LCD for multiparameter water quality measurement
  • 1–5-point calibrations with automatic buffer recognition
  • Automatic electrode diagnosis displays pH slope and offset
  • 1-point offset calibration adjusts displayed value accurately
  • Relative and absolute millivolt modes for reliable ORP measurements
  • 2–5-point calibrations, including 8 concentration points selection
  • Direct ion concentration readout simplifies measurement
  • Automatic electrode diagnosis displays calibration points and slopes
  • Selectable concentration units and ionic valency for flexibility
  • 1–5-point calibrations with automatic recognition for conductivity standards

 

Technical Specifications

Range-2.000 pH To 20.000 pH
Resolution0.001,0.01, 0.1 pH, Selectable
Accuracy±0.002 pH
Calibration Points1 to 5 Points
pH Buffer OptionsUSA, NIST, DIN, 2 Custom Buffers
Range±1999.9 mV
Resolution0.1, 1 mV, Selectable
Accuracy±0.2 mV
Calibration Points1 Point
Range0.001 to 19999 (Depending On The Range Of ISE)
Resolution0.001, 0.01, 0.1,1
Accuracy±0.5% F.S. (Monovalent), ±1% F.S. (Divalent)
Measurement Unitsppm, mg/L, mol/L, mmol/L
Calibration Points2 to 5 Points (0.001,0.01, 0.1,1,10, 100,1000, 10000)
Resolution0.001,0.01,0.1,1
Accuracy±0.5% F.S.
Calibration Points1 to 5 Points
Calibration Solutions10 pS/cm, 84 pS/cm, 1413 pS/cm, 12.88 mS/cm, 111.8 mS/cm
Temperature CoefficientLinear (0.0% To 10.0%/°C), Pure Water
Reference Temperature68°F Or 77°F (20 °C Or 25 °C)
Cell ConstantK=0.1,1, 10 Or Custom
Range0 ppm 10.00 ppm,100.0 ppm,1000 ppm, 10.00 ppt, 200.0ppt
Resolution0.01,0.1,1
Accuracy±1% F.S.
TDS Factor0.1 To 1.0 (default 0.5)
Range0.00 psu To 42.00 psu, 0.00 ppt To 80.00 ppt
Resolution0.01
Accuracy±1% F.S.
Range0.00 MQ To 20.00 MQ
Resolution0.01
Accuracy±1%F.S.
Range0.00 mg/L To 20.00 mg/L, 0.0% To 200.0% Saturation
Resolution0.01 mg/L, 0.1%
Accuracy±0.2 mg/L, ±2.0%
Calibration Points1 or 2 Points
Barometric Pressure Correction(0.60 bar to 1.13 bar) 60.0 kPa to 112.5 kPa or 450 mmHg to 850 mmHg, Manual
Salinity Correction0.0g/L to 50.0g/L, Manual
Temperature Compensation32 °F To 212 °F (0 °C to 100 °C), Manual or Automatic
Memory500 Data sets. USB Communication Interface
Power Requirements3 x 1.5 V AA Batteries or DC 5 V Power Adapter
Dimension6.69 in x 3.34 in x 1.18 in (170 mm x 85 mm x 30 mm)
Net Weight0.66 lbs. (300 g)

Reviews

There are no reviews yet.

Be the first to review “Enviro Test Construct Multi Parameter Water Quality Meter”

Your email address will not be published. Required fields are marked *

Scroll to Top