Overview
Enviro Test Construct chlorine ion sensor probe electrode is a digital ion sensor with RS485 communication and standard Modbus protocol. Housing material is corrosion resistant (PPS+POM), IP68 protection, suitable for most water quality monitoring environments. This online ion sensor uses an industrial grade composite electrode, the reference electrode double salt bridge design and have longer working life. Built in temperature sensor and compensation algorithm, high precision. It has been widely used in domestic and foreign scientific research institutions, chemical production, agricultural fertiliser, and organic wastewater industries. It is used for the detection of general sewage, wastewater and surface water. It can be installed in sink or flow tank.
Technical Specifications
| Ion’s Type | F-, Cl-, Ca2+, NO3-, NH4+, K+, Hardness etc |
| Range | 0.02 ppm to 1000 ppm (mg/L) |
| Resolution | 0.01 mg/L |
| Voltage/Power | 5.5 V DC to 28 V dc or ≤ 0.6 w |
| Response Time | < 60 s (90 % right value) |
| Communication Interface | RS485, standard Modbus RTU protocol (optional for analogy signal 4 mA to 20 mA) |
| Slope | 52 mV to 59 mV or 22 to 29. 77 °F (25 ℃) |
| Accuracy | < ± 2 % 77 °F (25 ℃) |
| Temperature Compensation | PT1000 |
| Working Environment | 32 °F to 104 °F (0 °C to 40 °C), 0 to 2 bar |
| Dimension | 1.18 in x 9.84 in (30 mm x 250 mm), Cable 16.40 ft (5 m) (It can be extended) |
| Weight | About 0.48 lb (0.22 kg) (without thread) |
Reviews
There are no reviews yet.