Enviro Test Construct PH Conductivity Tester

This Ph Conductivity Tester has a resolution of 0.01 pH, optical stability less than 0.002 A and weight of 7.71 lb

SKU: ETCCT-186 Category:

Technical Specification

ParameterpH/ORP/Cond/TDS(Sal)/DO/Temp
Accuracy0.01 pH
DisplayLCD display
Resolution0.01 pH
Wavelength accuracyCentre wavelength ±1 nm
Optical stabilityThe absorbance drift is less than 0.002 A within 1200 S
Ammonia nitrogen (low range)0.02 mg/L to 5.00 mg/L
Ammonia nitrogen (high range)5.00 mg/L to 25.00 mg/L
COD Mn (permanganate index)0.00 mg/L to 10.00 mg/L
Nitrate (nitrogen)0.02 mg/L to 10.0 mg/L
Nitrite nitrogen (low)0.02 mg/L to 1.0 mg/L
Nitrite nitrogen (high)1.0 mg/L to 5.0 mg/L
Residual chlorine (low range)0.02 mg/L to 2.00 mg/L
Residual chlorine (high range)2.00 mg/L to 10.00 mg/L
Total chlorine (low range)0.02 mg/L to 2.00 mg/L
Total chlorine (high range)2.00 mg/L to10.00 mg/L
DimensionMain Body: 3.14 in x 9.05 in x 2.16 in (80 mm × 230 mm × 55 mm)Host: 10.47 in x 7.87 in x 5.11 in (266 mm x 200 mm x 130 mm)
Single gross weight7.71 lb (3.5 kg)

Reviews

There are no reviews yet.

Be the first to review “Enviro Test Construct PH Conductivity Tester”

Your email address will not be published. Required fields are marked *

Scroll to Top