Enviro Test Construct Portable NH3 Gas Detector

This Portable NH3 Gas Detector has a warm-up time of 60 seconds, a working pressure range of -30 kpa to 200 kpa, and operating humidity of 95% RH.

 

SKU: ETCEPAGD-209 Category:

Features

  • Quality sensor
  • HD color screen
  • Voice prompt
  • Low power warning
  • Aluminum alloy casing
  • Bulk storage
  • High capacity battery
  • Triple alarm

 

Technical Specifications

Check GasMore than 1000 flammable, toxic and volatile gases
Working VoltageDC 3.7 V (lithium battery capacity 3000 mAh)
Unit%VOL, %LEL, PPM, mg/m3 Optional
Warm-Up Time60 s
Display Mode2.4-inch high-definition color screen
Alarm ModeSound, light, vibration
Operating Temperature-4 °F to 122 °F (-20 °C to 50 °C)
Operating Humidity95% RH without condensation
Working Pressure-30 kpa to 200 kpa
Detection MethodPump suction type
Explosion ProofExibI
IP GradeIP65
Pump Flow Rate300 to 500 cc/min
MaterialAluminum alloy; Strong; Wear and corrosion resistance
Data Storage4000 alarm records
Charging VoltageDC 5V
Size5.11 in x 2.48 in x 1.41 in (130 mm x 63 mm x 36 mm)
Weight1.10 lb. (0.5 kg)

Reviews

There are no reviews yet.

Be the first to review “Enviro Test Construct Portable NH3 Gas Detector”

Your email address will not be published. Required fields are marked *

Scroll to Top