Enviro Test Construct Digital Multimeter Signal Process Calibrator

This Digital Multimeter Signal Process Calibrator has measurements of 0.05%, frequency range of 1Hz to 20kHz and resistance from 0 to 200 Ω.

SKU: ETCGATI-156 Category:

Technical Specifications

DC V Range 0 V to 60.00 V (Upper Display ±30 V)
DC mA Range 0 mA to 24.000 mA (Upper Display ±24 mV)
DC mV Range -15.000 mV to 80.00 mV; 80.00 mV to 125.00 mV
Accuracy  0.05% +2
Resistance (2 wires, 3wires) Range 0.00 Ω to 440.00 Ω; 400.00 Ω to 3200.00 Ω
Resistance (4wires) Range 0.00 Ω to 440.00 Ω; 400.00 Ω to 3200.00 Ω
Accuracy resistance 0.15 Ω; 1.0 Ω
Frequency Range 1.000 Hz to 99.99 Hz; 1000.0 Hz to 9999.99 Hz; 10.000 kHz to 99.999 kHz
Output Index
DC mA (Active/Passive) Range 0 mA to 24.000 mA
DC V Range 0 V to 10.00 V
DC mV Range -15.00 mV to 99.99 mV; 100.00 mV to 125.00 mV
Frequency Range 0.20 Hz to 200.00 Hz; 200.0 Hz to 2000.0 Hz; 2.000 kHz to 20.00 kHz
RTD Pt100, Pt1000, Cu50, Cu100
General technical specifications
Operating temperature 14 °F to 131 °F (-10 °C to 55 °C)
Storage temperature -4 °F to 140 °F (-20 °C to 60 °C)
Relative humidity 0% RH to 90% RH, non-condensing
Power supply mode 6 or 7 batteries or AC adapter
Weight 1.43 lb (650 g)
Dimensions 7.87 in x 3.77 in x 1.85 in (200 mm × 96 mm × 47 mm)

 

Reviews

There are no reviews yet.

Be the first to review “Enviro Test Construct Digital Multimeter Signal Process Calibrator”

Your email address will not be published. Required fields are marked *

Scroll to Top