Enviro Test Construct Portable Pump-Suction Composite Gas Detector-IP67 Degree of Protection

Enviro Test Construct portable pump-suction composite gas detector – IP67 Degree of protection is an intelligent high-performance detection instrument that can continuously monitor a variety of gases and has the function of personnel fall alarm.

SKU: ETCIMGD-107 Category:

Overview

Enviro Test Construct portable pump-suction composite gas detector – IP67 Degree of protection is an intelligent high-performance detection instrument that can continuously monitor a variety of gases and has the function of personnel fall alarm. It can detect a variety of toxic and harmful gases at the same time to adapt to the analytical testing needs of different industries. Intuitive data display, large 2.3-inch full-color screen, faster response speed, and high-quality shell design raise the safety protection of workers to a whole new level.

 

Features

  • Sampling method
  • Support simultaneous detection of 1 to 7 kind of gases
  • Data storage, support USB
  • Support wireless connection
  • Standard configuration of 600 mA

 

Technical Specifications

Detection of GasesO2 in the air

H2S in the air

Combustible gas LEL in the air

CO in the air

CO2 in the air

Detection Principleelectrochemistry

electrochemistry

catalytic combustion

electrochemistry

Infrared

Measuring Range0 % VOL to 30 % VOL

0 PPM to 200 PPM

0 % LEL to 100 % LEL

0 PPM to 500 PPM

0 PPM to 5000 PPM

 Resolution0.01 % VOL

0.1 PPM

0.1 % LEL

0.1 PPM

1 PPM

Combination MethodFive in one

The sensors configured above can be turned on or off independently to avoid gas interference and extend the service life of the sensors

Sampling ModeActive pump suction type, built-in air pump can be opened or closed independently, air pump flow 500 ml/min
Indication Error≤ ± 3 % FS (electrochemical and catalytic combustion principle, higher accuracy requirements according to sensor performance)

≤ ± 2 % FS (infrared principle, higher accuracy required according to sensor performance);

 Reproducibility≤ ± 1 %
Zero Drift≤ ± 1 % (FS/year).
Response Time≤ 20 seconds (T90), (higher requirements depending on sensor performance).
Recovery Time≤ 30 seconds (higher requirements depending on sensor performance).
Housing MaterialHigh strength wear-resistant polycarbonate housing + stainless steel
BatteryLarge-capacity rechargeable lithium battery 6000 mAh, single gas continuous working time is more than 30 hours, five-in-one gas working time is more than 24 hours, charging time is less than 7 hours, support mobile power supply and charging
ChargerUSB high current 5 V 2.1 A fast charger; Compatible with universal USB mobile phone chargers
Alarm ModeSound alarm 95 dB@ 11.81 in (30 cm), vibration alarm, red LED alarm light, personnel fall alarm
Alarm Point SettingsA1 alarm value, A2 alarm value; TWA alarm value and STEL alarm value can be set separately
Display Screen2.3 in TFT large color screen
Keystroke7-key navigation keys
Direct ReadingMeasured values, data logging status, pump operating status, ambient temperature, and humidity
Data LoggingAutomatic data storage, 1 to 5 sensor storage intervals can be customized, can continuously store 300,000 sets of date and time data, if optional micro-TF memory card is chosen, can store more than 10 million sets of data
Data TransmissionSupport USB measurement data download and transmission;
Data PrintingSupport micro portable data printer Bluetooth wireless printing (optional).
CalibrationAbove level 2 of target point calibration function, can set the calibration value and adjust the zero with one button
Explosion-Proof StandardEx ia II.C T4 Ga (intrinsically safe).
Degree of ProtectionIP67
Operating ModeTwo operating modes: user mode and administrator mode are available
Environmental stress12.47 psi to 15.37 psi (86 kPa to 106 kPa)
Ambient Humidity0 % RH to 95 % RH (non-condensing).
Size3.15 in x 7.87 in x 2.28 in (8 cm × 20 cm × 5.8 cm)
Ambient Temperature– 4 °F to 131 °F (- 20 °C to 55 °C) (typical) – 40 °F to 158 °F (- 40 °C to 70 °C) (limit value).

(Higher temperature humidity requirements, optional high temperature sampling handle, can detect gas temperature up to about 1472 °F (800 °C))

Weight10.34 oz (520 g)

Reviews

There are no reviews yet.

Be the first to review “Enviro Test Construct Portable Pump-Suction Composite Gas Detector-IP67 Degree of Protection”

Your email address will not be published. Required fields are marked *

Scroll to Top